SmallRig Thumb Grip for Sony Alpha 7C II / Alpha 7CR / Alpha 7C (Black) 4820
1. Ergonomic design enhances the grip and improves safety when holding the camera with one hand.
2. Built-in cold shoe interface for expansion of fill light, microphone, and other accessories.
3. Built-in silicone pads to protect your camera and hot shoe electronic components.
4. Easily installed by sliding into the hot shoe of the camera.
$32.90
SmallRig Thumb Grip for Sony Alpha 7C II / Alpha 7CR / Alpha 7C (Black) 4820
SmallRig Thumb Grip for Sony Alpha 7C II / Alpha 7CR / Alpha 7C (Black) 4820 is designed to enhance the grip and improve safety when holding the camera with one hand. The thumb grip is easily installed by sliding into the camera hot shoe. Built-in silicone pads protect the camera body and hot shoe electronic components from dust, rust, and electronic shorts. The concave design of the grip improves safety and enhances convenience while one-handed shooting, facilitating content creation. Its built-in cold shoe interface can be used to expand accessories such as fill lights and microphones.
Work With
Sony Alpha 7C II / Alpha 7CR / Alpha 7C
Packing List
Thumb Grip x 1
Technical Data
Product Dimensions: 68.3 x 34.3 x 11.4mm / 2.7 x 1.4 x 0.5in
Package Dimensions: 86.0 x 77.5 x 25.0mm / 3.4 x 3.1 x 1.0in
Product Weight: 8.0 ? 2.0g / 0.28 ? 0.07oz
Package Weight: 43.0 ? 5.0g / 1.5 ? 0.2oz
Material(s): Aluminum Alloy, Silicone
Related products
-
Camera rig attachments, brackets and components
SmallRig 2046B NATO Clamp to Arri Rosette
1. It is compatible with NATO rail for convenient attachment and detachment, and it could be locked tight via a locking lever.
2. It could attach NATO Rail 1409 on the cage via NATO clamp on the one end and attach Rosette Handle 1810 via the rosette on the other end for handheld shooting.
3. It could attach NATO rail on the side of cage on the one end and attach Wooden Handle 1941 for handheld shooting on the other end.
4. It could attach NATO rail on the side of cage on the one end and attach NATO Rail with ARRI Rosette 1884 and then EVF support for monitor.SKU: SRI-2046B -
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W
