SmallRig 4″ Suction Cup Camera Mount Kit for Vehicle Shooting 4236B
- Load capacity up to 3kg on a vehicle running at or below 50mph (80km/h).
- All-in-one NATO clamp, quick-release suction cup, and magic arm.
$120.90
SmallRig 4″ Suction Cup Camera Mount Kit for Vehicle Shooting 4236B consists of a 4″ suction cup, a magic arm, and a dust cover. In particular, the robust and wear-resistant suction cup, made mostly of NBR, can work at -20 to 60. It is not easily deformed, is air-tight, and is suitable for clean, dry, smooth surfaces. With powerful suction force, it works with the magic arm to carry gear weighing as much as 3kg. The aluminum alloy suction cup camera mount features 1/4″-20 threaded holes, 3/8″-16 threaded holes, and ARRI 3/8″-16 locating holes that support 3757B, 3873, 3874, 2906B, 2070B, and 2115C. It is manually pumped and locked, with a warning-line indicator to ensure safety and reliability. When not used, put on the dust cover for a longer service life. In vehicle or indoor time-lapse shooting, the magic arm quickly connects to the suction cup via the NATO clamp on one end and to a camera on the other. Compatible cameras include Sony ZV-E10, Canon EOS M50, GoPro11 / 10 / 9 (in Cage 3084C), and DJI Action 3 (in Cage 4119).
Disclaimer: Please mount it onto recommended surfaces and check at least every two hours.
Related products
-
-
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W -
Camera rig attachments, brackets and components
Wooden Camera Top Plate (Sony FX9)
Top plate specifically for the Sony FX9. Arrays of various mounting points. Can be used with original Sony handle. Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.
SKU: WOO-54.275100
