LumenRadio CRMX Outdoor Flex IP67 RDM/Ethernet Flex
CRMX Outdoor™ Flex is the ultimate wireless DMX and RDM product for any installation. User configurable as either transmitter, repeater or receiver for one (1) DMX/RDM universe in full refresh rate with up to 512 channels.
CRMX Outdoor is an adaptation of the CRMX Nova™ product line for outdoor use and is compatible with other CRMX DMX/RDM products. CRMX Outdoor is the first RDM enabled wireless light control product both waterproof and vandal proof making it suitable for any outdoor installation.
CRMX Outdoor is the worlds first wireless DMX and RDM receiver for outdoor use that is designed to withstand many years of weather forces thanks to its unique combination of an IP67 rated housing and the vandal proof mounting cover.
$2,800.00
To fit in to old wireless systems with legacy equipment CRMX Outdoor Flex is compatible with W-DMX™ transmitters when configured in receiver mode. However when using it in this way you won’t get the benefits of the advanced CRMX technology.
CRMX Outdoor Flex have three modes of operation:
Transmitter mode. Ethernet enabled DMX/RDM transmitter with support for Streaming ACN, ArtNet, ETCNet 2 & 3, Pathport, etc.
Repeater mode. The CRMX Outdoor Flex will repeat the wireless DMX and RDM signal making it possible to extend the link range, and enabling more complex network structures.
Receiver mode.
Use the CRMX Outdoor Flex together with any other CRMX wireless RDM and wireless DMX products.
CRMX Outdoor utilized the international license free ISM band (2.4GHz).
Supported protocols
USITT DMX512, DMX512(1990) & DMX512-A
RDM ANSI E1.20
Streaming ACN (Draft and Final)
ArtNet I, II & 3
Pathport
Strand ShowNet
ETCNet 2 & 3
Power
High voltage input: 85-264VAC / 47-70Hz / 3W
Overvoltage and ESD protected power input
PoE. Power over Ethernet
Physical
Enclosure: IP67 vandal proof housing
Dimensions (W x H x D): 201 x 244 x 78 mm (7.9″ x 9.6″ x 3.1″)
Weight: 1.6kg, 3.5lbs
RF characteristics
Operational frequency range: 2402-2480 MHz
Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
Tested link range: 500m in urban area using 100mW output power mode
Connectors
DMX: Pluggable terminal strip, Phoenix® MSTB 2,5
Antenna: N female
AC: 13AWG Pluggable terminal strip
Ethernet: standard RJ45
| Brand |
|---|
Related products
-
Wireless DMX distribution
LumenRadio CRMX Outdoor Slim RX IP65 w/RDM & DALI Single Universe Receiver
CRMX Slim™ RX RDM is an IP65 rated receiver for one DMX/RDM universe being transmitted by any CRMX transmitter. It supports one full DMX/RDM universe of up to 512 channels at maximum refresh rate. CRMX Slim RX RDM is the smallest available RDM enabled wireless lighting control product rated for true outdoor use. It can easily be mounted inside light poles, or any other place where space is constrained. Together with an RDM compliant CRMX transmitter, the CRMX Slim RX RDM also supports RDM (ANSI E1.20). Use it together with our prized CRMX SuperNova RDM controller and management software to monitor signal strength and make settings from a remote location. Connect it to any RDM enabled fixture to get wireless feedback from the fixture.
Based on our advanced CRMX technology, the CRMX Slim RX RDM brings you all the advanced features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128 bit encryption and much more. In addition to this, you will get the possibility to configure and monitor your fixtures over RDM, without having to drag a cable. To fit into old wireless systems with legacy equipment, the CRMX Slim RX RDM is compatible with W-DMX™ transmitters working on the 2.4 GHz band. Using it in this way will not allow you to make use of the benefits of the advanced CRMX technology or RDM.
SKU: LRD-LR-800-5001 -
Wireless DMX distribution
RatPac AKS+ CE CRMX Transceiver with DMX In/Out
Imagine controlling lighting levels from your iPhone or tablet! Whether from your DIT tent, follow car, or right on set, the AKS Plus gives you full control. Small enough to fit in your hand, powerful enough to run your lights through a wireless transmitter and an Art-Net DMX node: An all in one unit powered by over 20 hours of battery life! Simply turn on the AKS Plus, choose RatPac AKS in your device’s WiFi settings, turn on your DMX app and you’re ready to go! Compatible with all wireless RatPac products and CRMX compatible devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0337.001.0A -
Wireless DMX distribution
Chauvet DJ DFIUSB-4PK Wireless DMX USB 4 Pack
Chauvet DJ DFIUSB-4PK
The Chauvet DJ DFIUSB-4PK is a pack of 4 DFi-USB wireless DMX dongles, the perfect way to get wireless DMX for your fixtures. Simply connect the USB into your compatible Chauvet DJ lighting fixture and your wireless ready! Supporting full 512 channel the USB’s can be set to either transmit or receive DMX, and also support wireless master / slave if you don’t want to use DMX.
These amazing devices are a game changer for portable lighting systems and shows where running can can prove difficult. They are fast and easy to use and can reach up to 50m (line of sight) range.SKU: CDJ-DFIUSB-4PK -
Wireless DMX distribution
LumenRadio Luna CRMX Transmitter/Receiver Single Universe DMX/RDM, CRMX and W-DMX
Wireless DMX distributionLumenRadio Luna CRMX Transmitter/Receiver Single Universe DMX/RDM, CRMX and W-DMX
Luna is the essential flex unit that gets the job done, being able to transmit or receive one universe of DMX. Featuring the same reliable CRMX as all other devices from LumenRadio it also features Bluetooth connectivity in a compact and rugged format.
SKU: LRD-LR-800-2211
