Tilta HDMI and Run/Stop Cable Clamp Attachment for Sony A7/A7R/A7S/A9 – Tilta Grey
Protect Your HDMI and Run/Stop Cables
Attaches to Sony a9 Camera Cage
Prevent Pulls or Disconnects
Secures with Stainless Steel Thumbscrew
Aluminum Construction
$19.95
Secure your Sony a9 camera cables with this HDMI and Run/Stop Cable Clamp Attachment from Tilta when your camera is mounted in the Tiltaing Sony a9 camera cage. The aluminum clamp attaches to the cage using the included screw, the HDMI and run/stop cables are threaded through, and then the clamp is tightened with a thumbscrew to prevent cable pulls or disconnects.
Related products
-
Camera rig attachments, brackets and components
Wooden Camera Top Plate (Sony FX9)
Top plate specifically for the Sony FX9. Arrays of various mounting points. Can be used with original Sony handle. Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.
SKU: WOO-54.275100 -
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W -
Camera rig attachments, brackets and components
SmallRig 2046B NATO Clamp to Arri Rosette
1. It is compatible with NATO rail for convenient attachment and detachment, and it could be locked tight via a locking lever.
2. It could attach NATO Rail 1409 on the cage via NATO clamp on the one end and attach Rosette Handle 1810 via the rosette on the other end for handheld shooting.
3. It could attach NATO rail on the side of cage on the one end and attach Wooden Handle 1941 for handheld shooting on the other end.
4. It could attach NATO rail on the side of cage on the one end and attach NATO Rail with ARRI Rosette 1884 and then EVF support for monitor.SKU: SRI-2046B
