Tilta HDMI Cable Clamp Attachment for Sony a7siii Full Cage – Black
Prevents Accidental Cable Disconnection
$15.00
The Tilta HDMI Cable Clamp Attachment for Sony a7S III Full Cage attaches to the side of the cage with a single screw and a locking pin to clamp your HDMI cable connector and prevent it from accidental disconnection. This version of the clamp is designed in black to best match the black version cage. After securing the clamp to the cage, you can use the included Allen key to tighten it around the cable connector by tightening the integrated screw at the top of the clamp. The integrated screw is ridged, so you can tighten it with your fingers as well, although not as tight.
Related products
-
-
-
Camera rig attachments, brackets and components
Wooden Camera Top Plate (Sony FX9)
Top plate specifically for the Sony FX9. Arrays of various mounting points. Can be used with original Sony handle. Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.
SKU: WOO-54.275100 -
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W
