Godox Timolink RX DMX Receiver

The D-FI XLR-TX gives you a wireless DMX Transmitter that transforms conventionally wired DMX setups into wireless! Battery-powered, the D-FI XLR-TX fits in the palm of your hand while providing instant wireless communication between similar fixtures.

CRMX Slim™ RX RDM is an IP65 rated receiver for one DMX/RDM universe being transmitted by any CRMX transmitter. It supports one full DMX/RDM universe of up to 512 channels at maximum refresh rate. CRMX Slim RX RDM is the smallest available RDM enabled wireless lighting control product rated for true outdoor use. It can easily be mounted inside light poles, or any other place where space is constrained. Together with an RDM compliant CRMX transmitter, the CRMX Slim RX RDM also supports RDM (ANSI E1.20). Use it together with our prized CRMX SuperNova RDM controller and management software to monitor signal strength and make settings from a remote location. Connect it to any RDM enabled fixture to get wireless feedback from the fixture.

Based on our advanced CRMX technology, the CRMX Slim RX RDM brings you all the advanced features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128 bit encryption and much more. In addition to this, you will get the possibility to configure and monitor your fixtures over RDM, without having to drag a cable. To fit into old wireless systems with legacy equipment, the CRMX Slim RX RDM is compatible with W-DMX™ transmitters working on the 2.4 GHz band. Using it in this way will not allow you to make use of the benefits of the advanced CRMX technology or RDM.

Exalux Connect RX100s is a standalone wireless DMX receiver especially designed to be powered through the USB connectors of a LED panel. RX100s can also run up to 10 hours with the small Exalux PowerBank battery.

RX100s suits with any LED fixture thanks to the flexible connector on cable system.