Miller Combo Live 30 Pedestal to suit 100mm fluid heads
Compact and portable with carry handle for column & dolly.
Wide height range 810mm (31.8?) up to 1690mm (66.5?) with extension (opt.).
Precise, smooth and low noise in-shot column with 450mm (17.7?) stroke.
Simple and easy to setup and use with drag control knob pressure column and lock lever pressure column.
Air adjustable column system for quick payload balancing.
Independent dolly wheel axle brake system eliminates wheel tyre indents.
Multiple wheel positions for linear or radius dolly tracking.
125mm (4.9?) dual ball bearing wheels for quick swivel-turn action.
Centre hub locking column with adjustable spider arm supports.
Steering wheel diameter 294mm (11.6?).
Dolly tracking width 970mm (38.2?).
Sturdy adjustable cable guards.
Portable hand pump with pressure gauge.
$8,349.00
The Miller Combo Live 30 Pedestal to suit 100mm fluid heads is a lightweight pedestal and floor dolly system for 100mm ball fluid heads. With an adjustable air column system for quick payload balancing, the pedestal features an 81 to 137cm height adjustment and a load capacity of 30kg. Dual ball bearing wheels individually fitted with axial brakes deliver even and smooth movement, with multiple wheel locking positions for linear or radius dolly tracking. The Combo Live 30 is simple and easy to set up and use with a drag control knob pressure column and a lock lever pressure column. It is also compact and portable with a carry handle for the column and dolly.
Related products
-
100mm+ Legs
Benro Aluminium 100mm Video Hi-Hat 2
The Benro 100mm Hi-Hat is a versatile video production tool that allows for unique camera placement and comes in a portable package. This aluminium leg/magnesium bowl hi-hat can be placed low to the ground, on stairs or even secured to a wooden board.
The small footprint allows the hi-hat to be used in tight spaces and on smaller surface areas. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. In addition, each leg features oversized rubber twist locks and is telescoping for adjusting the height. When you combine these two features, you can easily set up the hi-hat for use on uneven terrain and even stairs.
The 100mm version will accept a 100mm video head and includes a 3/8″-16 low profile tie down adapter for getting low to the ground shots. You can add a 100mm half-ball adapter (BL100) to mount any standard 3/8″-16 flat base video head or photo head. The large rubber feet are attached to a metal ball joint for quick positioning, which can be removed for attaching the included metal spiked feet. The feet also have pre-drilled holes for securing to wooden octagon boards when using on top of apple boxes or securing the board to the top of a ladder. There are three accessory mounts on the outside of the bowl come in handy for attaching monitor arms. Each 3/8″-16 male to ¼”-20 female insert can be used to convert any standard ¼”-20 screw to 3/8″-16 in addition to being removed for attaching 3/8″-16 accessories.Transporting the hi-hat is easy with the included carrying case.
SKU: BEN-HH100AV -
100mm+ Legs
Manfrotto MVTTWINFC 645 Fast Twin leg carbon tripod
The 645 FTT Fast Twin Carbon Tripod features a double tubing and FAST Lever Lock technology for the most robust support ever. The tripod is provided with a 2 in 1 bowl: a standard 100mm bowl along with a 75mm adapter to enable the use of a wider range of video heads. It also features a middle spreader lock. However, the 3-angle selectors make the use of a spreader a matter of optional preference.
This range was developed with the primary objective of making video shooting easier by reducing set up times and maintenance. The synchronized closure mechanisms between the upper and lower locks, enable videographers to control the entire leg with a single lock and get to work in record time. The new tripod provides maximum versatility, supporting the use of a broad choice of heads, and ensuring the utmost rigidity while also being extremely lightweight.
Moreover, the 645 FTT Fast Twin Carbon Tripod is compatible with the 2 in 1 ground and middle telescopic spreader/ (which is sold as an optional accessory) and it features a 3-angle selection mechanism for easy set up. It is equipped with spiked feet with rubber overshoes for a firm grip and adaptability to the most diverse shooting locations.SKU: MAN-MVTTWINFC -
100mm+ Legs
Manfrotto Tripod Video Twin Leg Alu Mid 58.5-153cm 25kg Payload 100mm Bowl and 75mm adapter
100mm+ LegsManfrotto Tripod Video Twin Leg Alu Mid 58.5-153cm 25kg Payload 100mm Bowl and 75mm adapter
The MVTTWINMA aluminium twin leg with middle spreader video tripod is a professional quality tripod with a two-stage, rigid and stable design making it ideal for all kinds of assignments. If you want to create professional level video or films, then this is the must have tripod. It features an aluminum casting 100mm bowl and it comes with an aluminum adapter that converts the bowl into a 75mm.
The tripod has mid-level spreader with telescopic arms that helps you to set leg angles accurately. It is also detachable, allowing the usage of the tripod also in combination with the ground spreader Manfrotto 165MV which is sold separately.
Leg locks are secure and reliable and twin spiked feet with rubber overshoes are provided for solid grounding.
For maximum versatility, the tripod can be used with various dollies (114MV and 181B).
SKU: MAN-MVTTWINMA -
100mm+ Legs
Miller Baby Legs 2-Stage Alloy Tripod W/ Soft Case And Ground Spreader
Built for maximum torsional strength, high versatility and compact storage, the 455,100mm, 2 stage baby Toggle tripod is the perfect partner for 402 series tripods where low shots are required. Constructed from lightweight alloy and employing single twist positive leg locks, the 455 2-stage Toggle tripod is quick to set up and pack away after the shoot.
Employing flexible, adjustable spreader arms the ground spreader, with pullover rubber stirrups, is very reliable tool of trade, requires minimal maintenance and can be used on even and semi even ground.SKU: MIL-455 -
100mm+ Legs
Manfrotto 528XB 528XB Pro Video Heavy Tripod
The 528XB is the ideal location tripod, with a massive 110 lbs (50kg) load capacity. It is a sturdy single-stage tripod with a single-tube leg structure. Tubes are made of stainless steel for strength under heavy loads, and aluminum for weight saving. The leg spread is fully adjustable, but also incorporates a 30° locked position for faster set up and greater strength. A 100mm bowl accepts industry-standard half-ball video heads and allows you to level the head quickly for accurate panoramic shots. The included claw ball allows you to use it with heads not equipped with a half ball. The 528XB includes a versatile mid-level spreader, which has telescopic ”ratchet” braces that click into place in each of the preset positions for faster deployment. Each brace can be individually set, allowing each tripod leg to be separately positioned.
SKU: MAN-528XB
