Core SWX Powerbase Edge Sony L-series Battery Cable
Use with Sony L-Series Devices
Sony L-Series Dummy Battery
Connect to Core SWX Powerbase EDGE
6″ Length
$55.00
The Core SWX Powerbase Edge Sony L-series Battery Cable allows you to power devices that use Sony L-Series batteries from the Core SWX Powerbase EDGE battery. The cable runs 15cm long and features an L-Series dummy battery on one end and a barrel connector for the Powerbase EDGE on the other.
Related products
-
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
Battery adapters and DC couplers
SmallRig NP-F Battery Adapter Plate Lite for BMPCC 4K, 6K – 3093
1. The plate fits Sony NP-F type batteries to provide greater battery life for BMPCC 4K & 6K.
2. It provides different output ports, including a 12V DC output port and a 7.4V DC output port.
3. LED indicator for low battery warning.
4. Rubber pads on the bottom for a more stable installation.
5. Two Charging Cables – LP-E6 Dummy Battery Cable and a DC to 2 Pin LEMO Cable.SKU: SRI-3093 -
-
Battery adapters and DC couplers
Dynacore D-SA V-Lock to Gold Mount Adaptor
It may convert the V-plate to the Gold Mount bracket. It offers a solution to allow the use of Gold Mount batteries on V-Mount cameras.
It can also be used as a charger adapter, enabling you to charge Gold Mount batteries on V-lock chargers.
- Lock Gold Mount battery to the Gold Mount side of the D-SA, then the battery converts into V-Mount.
- Lock V-Mount side of D-SA with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 120×84×24.5mmSKU: DYN-D-SA
