Kaiser Fototechnik 5507 “microdrive” Copy Stand
- Non-reflecting matt gray base board with printed fine grid.
- Feet adjustable in height.
- Spirit level in column base.
- Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales.
- Hand crank-operated height adjustment by friction drive on plastic bearings.
- Weight compensation by roll-off spring mechanism.
- Column can be mounted rotated 180?.
Specs
- Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
Column height: approx. 1000 mm (39.4 in.)
Downloads
$2,325.00
Related products
-
Enlargers and copy stands
Kaiser Fototechnik 4475 “microdrive” column, 1 m
Wide and extremely vibration-resistant column of aluminium tubing with dull black anodized surface and cm and inch scales.
- With mount and fastening mechanism for camera arms and for lower part enlarger head 4568.
- Height adjustment by hand crank.
- Cross-sectional dimensions of the column: 70 x 35 mm (2.8 x 1.4 in.)
SKU: KFO-KF-4475 -
Enlargers and copy stands
Kaiser Fototechnik 5780 Wolfenbuttel Book Reflector 45N
For digital reproduction of damageable historic books and documents with critical condition. Especially for books that cannot be opened for more than 45 Deg
Specifications
- Basic table (WxHxD): 88 x 75 x 78 cm (24 x 29 x 30 in)
- Max. book/page dimensions: 45 x 45 cm (17.5 x 17.5 in)
- Max. thickness of book:?20 cm (7.9 in)
- Covered area close to fold: approx. 4 mm
- Total height of book reflector: 2.07 m (7 ft)
- Total height of camera stand: 2.0 m (6.5 ft)
- Required floor space for book reflector and camera stand: max 150 x 120 cm (5 x 4 ft)
SKU: KFO-KF-5780 -
Enlargers and copy stands
Kaiser Fototechnik 4583 Compound Negative Carrier
For use with all negative masks and glass inserts size 100 x 72,5 mm (3.9 x 2.9 in.). Suitable for all SYSTEM-V enlargers made from 10/94 on (05 series).
- Adjustable guide pins for film widths 61.5 mm (rollfilm 120), 41 mm (rollfilm 127) and 35 mm film.
- Four steplessly adjustable masking strips for selecting the desired detail.
- Two grid pins at standard hole intervals.
- Dimensions: approx. 142 x 37 x 123 mm (5.6 x 1.4 x 4.8 in.)
SKU: KFO-KF-4583 -
Enlargers and copy stands
Kaiser Fototechnik 4478 Column, 1 m
Wide and extremely vibration-resistant column of aluminium tubing with dull black anodized surface and cm and inch scales.
- With mount and fastening mechanism for camera arms and for lower part enlarger head 4568.
- Height adjustment by hand crank.
- Cross-sectional dimensions of the column: 70 x 35 mm (2.8 x 1.4 in.)
4407: Height adjusted by gear rack, with weight compensation by built-in roller spring, additional 1:6 fine drive. Locking screw for fixing height adjustment. Height: 80 cm (31.5 in.)
In combination together with the?Metal Plate?5504?and the camera arm 5523 also useable as a Kaiser?Vertical Stand (see image no. 2, 3, 4).
4474: Height adjusted by friction gear with plastic bearings, weight compensated by built-in roller spring, height 1 m (40 in.)?4475: Height adjusted by gear rack with weight compensation by built-in roller spring, additional 1:6 fine drive. Locking screw for fixing height adjustment. Height 1 m (40 in.)?
In combination together with the?Metal Plate?5504?and the camera arm 5523 also useable as a Kaiser?Vertical Stand (see image no. 2, 3, 4).4476: same as 4475, but without fine drive.?
4478: With 2 mounts for camera arms. Height adjusted by gear rack, upper mount with weight compensation by built-in roller spring, both mounts with locking screw for fixing height adjustment. Height: 1 m (40 in.)
4408: Height adjusted by gear rack, weight compensated by built-in roller spring, locking screw for fixing height adjustment. Height 1.2 m (47 in.)?
4409: Height adjusted by friction gear with plastic bearings, weight compensated by built-in roller spring, locking screw for fixing height adjustment. Height: 1.5 m (60 in.)
?
SKU: KFO-KF-4478
