9.Solutions Ex-sus pole
The EX-SUS Extension Suspension Pole from 9.Solutions has a telescoping design that allows you to hang lights and other gear weighing up to 44 lb overhead and vary their height from 43 – 78″. The pole has a 3/8″ male thread on one end for mounting to gear such as the Barracuda Clamp and a 5/8″ pin at the other end for your light. Adding another clamp to the pin to hold a pole gives you horizontal capability.
$276.36
Key Features
– Load Capacity: 44 lb
– Telescoping Design: 43 – 78″
– For Mounting Equipment Overhead
– 3/8″ Male Thread / 5/8″ Pin
Related products
-
Arms Articulated/Magic/Friction and Flexible
Manfrotto 244RC Arm Variable Friction with 200PL adaptor 3kg Payload 53cm Length
Arms Articulated/Magic/Friction and FlexibleManfrotto 244RC Arm Variable Friction with 200PL adaptor 3kg Payload 53cm Length
Super controlled movement that ensure perfect results every time. The Photo Variable Friction Arm With Quick Release Plate is ideal if you want a piece of kit that offers quick and versatile use.
One of the major highlights of this photo variable friction arm is its articulated arm with variable friction. This special design lets you move around simply and precisely, so you can be sure to get the exact angle you need. With its large locking knob, you’ll be able to secure everything in place with minimal fuss.
The quick release plate provides you with added security, thanks to its very own secondary safety lock. Now both you and your photo variable friction arm are safe on set with this photo variable friction arm.
Flexible and practical, this kit also works perfectly with the 035 Super Clamp. You can slot it right into place with any 16mm female sockets, including the essential 6.35mm thread attachment. This freedom of use lets you get started straight away on your next photography job, no matter what practical solutions may be required.
Quick and easy to set up, safe and versatile to use. The Variable Friction Arm With Quick Release Plate finally gives you the control you’ve been looking for. Purchase your photo variable friction arm today.
SKU: MAN-244RC -
Arms Articulated/Magic/Friction and Flexible
Manfrotto 143N Arm Magic
Functional and practical, the Magic Arm Kit is an essential part of any photographer’s or content creator’s kit. Made to the highest quality Italian standards, the tough and hard wearing aluminium material makes this all in one solution a highly dependable accessory.
Includes (1x) Magic Arm (143N).
A highlight of this product is its smart centre lever, especially made to lock for all three main movements during your photography and video work. This fast and secure solution gives you assurance that there won’t be any unwanted slips or problems when you need to focus on getting that perfect shot.
The design of the Magic Arm balances strength with flexibility. Weighing a mere 1.7kg, the Magic Arm can securely hold weights up to 3kg while also extending to a maximum length of 53cm. With reliable features and uncompromised build quality, you can trust this kit to handle the most demanding of photography work.
Designed to give you everything you need in one bag, it includes a camera bracket, a super clamp, and a handy backlight base. All in all, this gives you the complete magic photo arm set.
Each end of this arm is equipped with a standard-size 16mm spigot which is Anti-Rotation Super Clamp 035 Compatible and features one 1/4” female thread attachment on one side and 3/8” female thread attachment on the other. In addition, the arm is compatible with a whole host of Manfrotto Lighting Accessories such as floor stands, Clamps, Camera Brackets and more. This gives you a fully compatible and functional magic photo arm you may take with you wherever you go. The perfect item of photography equipment to support LED lights, studio lighting and studio equipment, in fact just about anything in or out of the studio needed to be positioned flexibly and securely!
SKU: MAN-143N -
Arms Articulated/Magic/Friction and Flexible
Manfrotto 396AB-2 Arm Double Articulated 2 Sec Extends to 62.5cm 5kg Payload 2x 16mm Stud 1/4” & 3/8” F
Arms Articulated/Magic/Friction and FlexibleManfrotto 396AB-2 Arm Double Articulated 2 Sec Extends to 62.5cm 5kg Payload 2x 16mm Stud 1/4” & 3/8” F
Excellent performance: robustness, lightness and versatility… these are the features of the new double articulated arm range. The 396 family has been developed to provide greater robustness than the 196 range and to support heavier loads (upto 5kg), though keeping versatility thanks to its extendable sliding arm system (extends upto 625mm), further enhanced by its quick lock system. The new bottom attachment adds to the strength and versatility of the 396, with a spigot that combines both a hexagonal part (for anti-rotation fixing to the Superclamp system) and a universal adapter section (for fitting to a wide range of stands, clamps and accessories). Top attachment: 16mm spigot 3/8” light attachment. Bottom attachment: Double-anchored 16mm hexagonal/universal spigot.
SKU: MAN-396AB-2 -
Arms Articulated/Magic/Friction and Flexible
Avenger D244N Arm Variable Friction T-Handle 3Kg Payload 53cm Long 2x 5/8 stud 3/8 & 1/4 Female
Arms Articulated/Magic/Friction and FlexibleAvenger D244N Arm Variable Friction T-Handle 3Kg Payload 53cm Long 2x 5/8 stud 3/8 & 1/4 Female
The Avenger D244N Variable Friction Arm with large locking T-Knob is one of the most popular arms made by Avenger! Often called a Magic Arm™ the D244N is used for lights, camera and audio applications and is the industry standard for most remote rigging applications. The D244N Variable Friction Arm uses a central friction locking handle to lock all 3 points of the arm in place. The length of the arm is 53 cm/20.87 inch and is capable of holding loads up to 3 kg/6.6 lb. Typically the D244N arm is mounted on to a Super Clamp™ or a gravity cast Super Clamp™ but you can also mount it to light stands and other accessories such as wall plates by using the baby 16 mm/ 5/8 inch pin on either end of the arm. The baby pins on each end of the arms also have a 9.53 mm/ 3/8 inch thread receiver or a 6.35 mm/ 1/4 inch threaded receiver. The remote mounting possibilities of this versatile tool are endless! Recommended Accessories: C1575B, C1550, 125, 147, C155, FF3276, 014-14, 014-38, F301, F831TH.
SKU: AVN-D244N
