Leofoto Mr. Q LQ-284C with LH-30 28mm 4 Sec High-end CF Tripod with Ball Head model: LH-30 (with centre column)
The Leofoto LQ-284C carbon tripod is part of the versatile Leofoto Mr.Q tripod series. The LQ-284C has four leg sections and when using the removable center column it reaches a maximum working height of 158 cm. In contrast, the minimum working height of this tripod is only 16 cm, which is fine for working low to the ground. Despite its light weight of only 1.22 kilograms, it has a carrying capacity of 10 kilograms. The LQ-284C tripod comes with an LH-30 ball head, a multifunctional center column and several useful accessories.
The 10-layer woven carbon fiber makes the LQ-284C tripod strong, while including the ball head it remains lightweight at only 1.53 kilograms. In addition, the 3rd generation carbon weave pattern gives the tripod a robust and striking appearance. On the side of tripod platform is a 3/8-inch and ¼-inch thread to expand the tripod with a magic arm or other accessory. All Leofoto tripods, Leofoto LQ-284C is no exception, come with a 10-year warranty.
$808.00
Center column included
The Leofoto Mr. Q tripod has a removable tripod plate with a diameter of 50 mm. On this plate you can mount the LH-30 ballhead. It is also possible to take out the plate and place the supplied center column in the free space. Placing the center column takes only a few seconds and no tools are needed. You can adjust the height of the center column with the silver butterfly nut with rubber anti-slip strips. The center column (25mm) is 31cm long and provides the hefty maximum height. This makes the tripod widely applicable in the field of studio photography, landscape photography and even macro photography.
Features of the Leofoto tripod
You can adjust the height of the legs by using the intuitive TwistLock system. This allows you to loosen and tighten a leg section of the tripod in an instant. The rubber turning handles also make it possible to operate the legs with gloves on. You can also adjust the tilt angle of the carbon tripod legs in three angles: 23°, 55° and 85°. At the greatest tilt angle, the tripod legs lie almost flat on the ground. This allows you to reach the minimum working height of 16 cm. In addition, the tripod is equipped with rubber feet, which prevent the legs from sliding on slippery surfaces. The feet can be exchanged with the supplied spikes. The spikes give more grip on soft surfaces. This Leofoto carbon tripod with ball head comes with a water-repellent asymmetrical carrying bag for more comfort during transport.
Professional LH-30 ball head
The professional LH-30 ball head rotates 360-degrees, tilts from portrait to landscape position and has a dual panning function. It also features a level and a universal 3/8″ tripod screw to which you can attach virtually any camera. The friction is adjustable via a convenient dial, which allows for more precise adjustment. The ball head has a diameter of 30mm and a panning base of 47mm. The height is 80 mm. This ball head comes with a BPL-50 quick release plate and is Arca-Swiss Compatible. It can carry as much as 15 kilograms and weighs 310 grams itself.
Arca-Swiss compatible tripod plate
Thanks to the universal BPL-50 Arca-Swiss quick-release plate, you attach the camera to the Leofoto LH-30 ballhead in no time. You unscrew the clamp, slide the 50mm long quick release plate in the holder and screw the clamp back on. Of course, this quick release plate is also exchangeable with another universal Arca-Swiss compatible quick release plate. Also with a Leofoto L-plate the camera can be mounted on this head.
Related products
-
Photo tripod legs and systems
Benro Tortoise 14C Carbon Fibre 4 Section Photo Tripod Twist Lock GX25 Ball Head
Photo tripod legs and systemsBenro Tortoise 14C Carbon Fibre 4 Section Photo Tripod Twist Lock GX25 Ball Head
The small yet mighty Tortoise Columnless Carbon Fibre One Series Tripod with GX25 Ball Head from Benro is a compact, lightweight travel tripod with a high load capacity and remarkable stability. The centre column-free design makes it nimble and lightweight for travel and reduces the potential for shake common to high centre column positioning. This is especially significant when shooting video content. The legs offer independent spread and three locking positions and incorporate automatic leg angle adjustment for fast and sure setup. The aluminium leg spider features a 1/4″-20 accessory mounts for extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.
SKU: BEN-TTOR14CGX25 -
Photo tripod legs and systems
Benro Tortoise 14C Carbon Fibre 4 Section Photo Tripod Twist Lock
The small yet mighty Tortoise Columnless Carbon Fibre One Series Tripod from Benro is a compact, lightweight travel tripod with a high load capacity and remarkable stability. The centre column-free design makes it nimble and lightweight for travel and reduces the potential for shake common to high centre column positioning. This is especially significant when shooting video content. The legs offer independent spread and three locking positions and incorporate automatic leg angle adjustment for fast and sure setup. The aluminium leg spider features a 1/4″-20 accessory mounts for extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.
SKU: BEN-TTOR14C -
Photo tripod legs and systems
Benro Tortoise 03C Carbon Fibre 3 Section Photo Tripod Twist Lock
The small yet mighty Tortoise Columnless Carbon Fibre Zero Series Tripod from Benro is a compact, lightweight travel tripod with a high load capacity and remarkable stability. The centre column-free design makes it nimble and lightweight for travel and reduces the potential for shake common to high centre column positioning. This is especially significant when shooting video content. The legs offer independent spread and three locking positions and incorporate automatic leg angle adjustment for fast and sure setup. The aluminium leg spider features a 1/4″-20 accessory mounts for extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.
SKU: BEN-TTOR03C -
Photo tripod legs and systems
Benro MeFoto Backpacker Tripod Aluminium Twist Lock Titanium
The MeFOTO BackPacker Classic is a lightweight travel photo tripod. The MeFOTO BackPacker Classic is available in Black and Titanium anodized finishes. This travel style tripod is only 7cm when reverse folded and 28cm when fully extended. The RoadTrip weighs 3.7 lb (1.6 kg). The Q0 ballhead uses an Arca-Swiss style quick release plate. Ideal for supporting smartphones, tablets, point & shoot, mirrorless, micro 4/3 and DSLR cameras with shorter lenses, the BackPacker can support up to 8.8 lb.
Item includes: BackPacker Tripod, Q0 Ballhead, PU50 Camera Plate and Carry Case with Shoulder Strap.
The MeFOTO BackPacker Classic Aluminium Travel Tripod Kit from Benro offers a sturdy, compact aluminium alloy tripod that extends to 156.5cm, supports up to 4kg and folds down to 39.1cm.
The tripod’s legs can be spread independently, with two-position leg angle stops. A ballast hook is located in a recess at the bottom of the centre column, allowing heavy objects to be hung for additional stability.
The Q0 ball head offers separate head and pan locks, a 360° pan index and an integral bubble level. An Arca-type quick release plate with a 1/4″-20 camera screw is included in the kit, along with a durable carrying case with a shoulder strap for storage and transport.
SKU: BEN-BMBPATTN -
Photo tripod legs and systems
Benro MeFoto Globetrotter Tripod Aluminium Monopod Twist Lock Black
The MeFOTO GlobeTrotter Classic is a travel photo tripod and monopod in one. Great for both compact and full frame cameras with larger lenses, plus converts to a monopod in seconds. Only 16.1″ when folded yet 64.2″ extended and can support 26.4 lb. The Q2 triple-action ballhead uses an Arca-Swiss style quick release plate and has separate controls for pan lock, drag and friction. Ideal for point & shoot, mirrorless, micro 4/3 and DSLR cameras with larger lenses, the GlobeTrotter can support up to 26.4 lb.
Item Includes: GlobeTrotter Tripod, Q2 Ballhead, PU60 Camera Plate, Spiked Feet and Carry Case with Shoulder Strap.
The MeFoto Globetrotter Aluminium Travel Tripod Kit from Benro is a sturdy, compact tripod that extends to 163cm, supports up to 12kg, and folds down to just over 41cm. The GlobeTrotter is actually two camera supports in one: a foam-cushioned, removable leg attaches to the centre column to convert to full size monopod.
The tripod’s legs can be spread independently with two-position leg angle stops. A spring-loaded ballast hook is located at the bottom of the centre column, allowing a heavy object to hang from it for additional stability.
The Q2 Triple Action Arca-type ball head features separate head and pan locks, a 360° pan index, and an integral bubble level. The included quick-release plate has a 1/4″-20 camera screw and rubberised pads for added traction to prevent the camera from moving and protects the finish from marring.
SKU: BEN-BMGTABLK
