Deity S-Mic 2 Shotgun Microphone
- Low Off-Axis Coloration
- Supercardioid Pattern
- All Brass Body, Black Speckle Finish
- Low Self-Noise
- Water Resistant and Humidity Proof
- 50Hz to 20kHz Frequency Response
- Includes Foam Windscreen
- Microphone Stand Clip
- Waterproof Hardcase with Cut-Foam Insert
$625.00
The S-MIC 2 Shotgun Microphone from Deity Microphones features a supercardioid polar pattern, a low-noise floor, and an all-brass body with a gold-coated PCB (printed circuit board). It can be used to capture audio for video and interview applications.
The PCB is sprayed and coated with a clear epoxy to perform without issues even in the most humid environments. This coating gives the microphone a water resistance level that allows it to work in the rain without being damaged. The microphone is powered with 24 or 48V phantom power and is equipped with a 3-pin XLR output connector.
Additionally, a foam windscreen, a microphone stand clip with a threaded 3/8″ female mount, and a waterproof hardcase with custom cut-foam insert is included.
- Deity S-MIC 2 Shotgun Microphone
- Foam Windscreen
- Mic Stand Clip with Threaded 3/8″ Female Mount
- Waterproof Hardcase with Custom Cut Foam Insert
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Transducer | Condenser |
| Polar Pattern | Supercardioid |
| Frequency Range | 50 Hz to 20 kHz |
| Equivalent Noise Level | 12 dB A-Weighted |
| Maximum SPL | 130 dB SPL Peak |
| THD | < 0.5% |
| Impedance | 75 Ohms |
| Load Impedance | 800 Ohms |
| Sensitivity | 32 dB at 1 kHz |
| General | |
|---|---|
| Output Connectors | 1 x 3-Pin XLR |
| Operating Voltage | 24 to 48 V |
| Operating Temperature | 14 to 158°F / -10.00 to 70.00°C |
| Length | 9.84″ / 24.99 cm |
| Diameter | 0.75″ / 19.05 mm |
| Weight | 0.44 lb / 200 g |
Related products
-
Audio
PSC Garfield Hush Lav Lavalier Microphone Quieting Sleeves White 15 Pack
Hush Lavs are precut and drilled lavalier mic quieting sleeves used for recording clean audio with radio lavalier mics. They minimise clothing noise and thereby achieve your goals. They are designed for use with the Sanken COS-11 and Countryman B3 and B6 Lavalier Microphones, and fit most other small lavalier microphones.
SKU: PSC-SGARHL-WHT -
Video Microphones
Rode NTG3B RF-Bias Shotgun Microphone (Black)
The Rode NTG3B is a super-cardioid shotgun microphone, designed for professional use on film, tv, and wherever high-resolution broadcast is required. As Rodes premier directional microphone, the NTG3 exhibits superlative audio quality. Featuring a rich, warm and full frequency response. With its RF bias technology, the NTG3 is almost completely resistant to moisture. Making it the only option if you’re recording in environments where condensation is an issue. Built from solid brass with an anti-glare, nickel-plated or matte black finish. For an incredibly robust build while remaining lightweight in size.
Additionally, its precise yet forgiving polar pattern ensures whether you’re using it on camera, or on a boom pole. You’ll capture crystal-clear audio every time. Also supplied with your RODE NTG3B Microphone is a durable, aluminum storage cylinder. Providing ultimate protection while in storage and transport. With the cylinder tightly sealed at both ends, you can ensure it’s highly weatherproof. Only adding to the credentials of the microphones rugged performance.
Finally, designed and made in Australia, plus covered by RODE Microphones industry-leading 10 year warranty.
SKU: ROD-NTG3B -
Video Microphones
Rode VideoMic GO II – Lightweight On-Camera Microphone
The VideoMic GO II is a versatile and lightweight shotgun microphone that excels in a range of recording applications. It features a 3.5mm TRS output for use with a camera. Plus a digital USB output for recording with mobile devices and computers. It delivers crisp, clear, directional sound, making it ideal for filmmaking and vlogging. And is also fully compatible with the RØDE Connect podcasting and streaming software for Mac and PC. When used in USB mode, the 3.5mm output doubles as a headphone output for easy monitoring and playback.
The VideoMic GO II also features the same revolutionary annular line tube design as the VideoMic NTG and NTG5; which offer unmatched transparency and a natural sound. Supported in a detachable Rycote shock mount, the VideoMic GO II provides you with an extremely convenient cable management system.
Furthermore, the VideoMic GO II offers the same plug-in-powered battery-free operation as the original VideoMic GO; but also adds amazing USB digital functionality.
The VideoMic GO II is an ultra-lightweight and versatile shotgun microphone for capturing incredible audio with a camera. In addition to being incredibly compact and lightweight, the VideoMic GO II is super simple to use and requires no batteries to operate.
The supremely versatile connectivity of the VideoMic GO II allows full functionality as a USB microphone, where the 3.5mm output will act as a powerful headphone output. Introducing the next microphone for RØDE Connect, allowing up to four microphones to be plugged into one computer with an optimised DSP, compressor, noise gate; and the legendary Aural Exciter and Big Bottom.
Complete compatibility with mobile devices and unlocked digital controlConnection through the USB-C output is certified for direct use with iOS and Android devices, with supporting cables specifically designed with optimal cable management. Without the requirement of additional adapters. Compatibility with RØDE Central and Reporter unlock additional features in the microphone such as a high-pass filter, -20dB pad and a windshield compensation.
Also available is the Rode WS12 Windshield for VideoMicGoII.SKU: ROD-VMGOII -
Video Microphones
Rode NTG8 Long Shotgun Microphone
The NTG8 is a broadcast-grade long shotgun microphone designed for the most demanding situations where a highly directional sound pickup is required. It features RF-bias technology that yields superior resistance to moisture and condensation, making it suitable for outdoor shoots in adverse conditions. The NTG8 has a rich, warm sound and a tightly controlled polar pattern that with excellent directionality even at lower frequencies. It is the perfect microphone in applications where distance mic’ing is required.
Key Features:
Broadcast-grade long shotgun microphone
Highly resistant to moisture and condensation
Highly directional sound pickup, even at lower frequencies
RF-bias technology
Includes SM8 shock mount for isolation from vibrations and handling noiseSKU: ROD-NTG8 -
Audio, Audio accessories
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+
The RODE DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed to help minimize wind noise and improve audio recording clarity in windy environments.
The DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area, whilst ensuring a secure fit specifically suited to the VMP+ Microphone.
The DeadCat VMP+ is only compatible with the VideoMic Pro+ (released September 2017). For other VideoMic Pro models please see the DeadCat VMP and DeadCat VMPR.
SKU: ROD-DEADCATVMP+
