Rycote Cable, XLR-3m To Angled XLR-3f, 260mm
Available on back-order
Cable, XLR-3m to Lightweight 90° XLR-3f, 260mm
Product Code: 042277
The Cyclone Windshield Kit is supplied with ultra-soft, flexible Mogami cable, fitted with gold pin Neutrik XX-series XLR connectors.
Output male XLR locked in angled position on lightweight boom adaptor, allowing internal or external pole cables and plug-on transmitters to be attached securely.
MyMic – https://mymic.rycote.com/products/cable-xlr-3m-to-lightweight-90-xlr-3f-260mm/
$128.00
Available on back-order
Related products
-
Microphone Accessories
Shure Microphone A2WS-BK Foam Windscreen for SM57 (Black)
0 out of 5(0)Shure A2WS-BK
The Shure A2WS-BK is a high-quality foam windshield for the Shure SM57 545 and 546 series microphones. Perfect for helping to reduce pops, and unwanted wind-noise from being picked up.SKU: SHR-A2WS-BK -
Microphone Accessories
Rycote Back-To-Back Clips
0 out of 5(0)Back-to-Back Clips
Product Code: 048488
Universal back to back clips for piggy backing round and slab sided microphones between 19 and 25mm diameter. Manufactured from the same Hytrel material as the Lyre, these clips also feature a soft rubber internal grip to minimise noise and damage on the microphone body.
Main Benefits:
- Fit any mic 19/25mm in diameter
- Manufactured from the same Hytrel material as the Lyre
- Soft rubber internal grip to minimise noise and damage on the microphone body
- Come with rubber bands to tighten the grip and reduce the risk of slipping when piggy backing microphones together
Universal back to back clips for piggy backing round and slab sided microphones between 19 and 25mm diameter. Manufactured from the same Hytrel material as the Lyre, these clips also feature a soft rubber internal grip to minimise noise and damage on the microphone body.
Compatibility – https://mymic.rycote.com/products/back-to-back-clips/#compatibility
MyMic – https://mymic.rycote.com/products/back-to-back-clips/
SKU: RYC-RY048488 -
Microphone Accessories
Rycote Single Square White Mic Flag
0 out of 5(0)Square White Mic Flag
Product Code: 107307
A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307 -
Microphone Accessories
Shure A57AWS Locking Windscreen for Beta57 Beta57 or Beta57A (Black)
0 out of 5(0)The Shure A57AWS is a specially designed locking windshield to suit the popular Beta 57 and Beta 57A instrument microphones. The A57AWS helps to remove unwanted pops and wind noise from entering the microphone. A must have for live musicians, drums, and anyone wanting the best performance and sound from their mic.
SKU: SHR-A57AWS