Rycote Super-Shield Kit, Large
Available on back-order
Super-Shield Kit, Large
Product Code: 010322
The Super-Shield Kit is a complete windshield and shock mounting system for shotgun microphones from 250-300mm in length
Main Benefits:
- Lightweight basket windshield system with a minimum number of parts, simple to use.
- Configurable for aerodynamic and centre-of-mass balance.
- Excellent wind noise reduction and lyre-standard isolation from handling noise.
- Removable fur Windjammer to add the highest levels of wind noise suppression.
The Super-Shield Kit is a complete windshield and shock mounting system for shotgun microphones from 250mm to 300mm in length.
Suspension
The Super-Shield Suspension provides your microphone isolation from shocks and vibrations, thanks to its patented Lyre technology. The Lyre cuts handling noise with any axial microphones, without the use of rubbers or elastic and is the accepted broadcast industry standard. The suspension is suitable for microphones 19mm (3/4”) to 25mm (1”) in shaft diameter, using two snap-in, pinch-release Lyre suspensions, that can be slotted into any of six positions for perfect balance and fit. The suspension comes supplied with an 18” (450mm) highly flexibility microphone cable.
Windshield
The Super-Shield Windshield is made up from two “pods” which attach to the central chassis. They are lightweight, durable baskets made from flexible grey plastic netting with a screening material attached. The windshield has a twist lock system onto the suspension chassis ring, and when fitted completely surround the whole microphone, connector and suspension. This system creates a still volume of air around the microphone, which provides excellent wind-noise reduction, with minimal High-Frequency loss.
Windjammer
The Windjammer is a high-quality synthetic fur cover which provides excellent protection against extreme wind noise.
The Super-Shield Windjammer is handmade in the UK from highest quality materials available, which are specially designed and manufactured for the purpose. As a result it has very little detrimental effect on the high frequencies in the audio being captured.
Tech Specs
Suitable for:Mics 19/25mm, from 250-300mm length
Body length: 350mm
Overall Length: 450mm
Max. Diameter: 100mm
Net Weight*: 694 gram
Compatibility – https://mymic.rycote.com/products/super-shield-kit-large/#compatibility
MyMic – https://mymic.rycote.com/products/super-shield-kit-large/
$585.00
Available on back-order
Related products
-
-
Microphone Accessories
Rycote Neumann Tlm 103 Foam (Single)
Neumann TLM 103 Foam
Product Code: 104423
Foam Windshield for Neumann TLM 103
Main Benefits:
- Up to 10 dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield
- Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam
The Large Diaphragm Mic Foam is a discreet, slip-on foam windshield, designed to protect large-diaphragm shotgun microphones against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, our foam windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.
Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.
Compatibility – https://mymic.rycote.com/products/neumann-tlm-103-foam/#compatibility
MyMic – https://mymic.rycote.com/products/neumann-tlm-103-foam/
SKU: RYC-RY104423 -
Microphone Accessories
Shure A58WS-RD Foam Windscreen for SM58 / Beta58 (Red)
The Shure A58WS-RD is a high quality foam windshield designed for the Shure SM58 / PG48 / PG58 / Beta58 / and other similar shaped microphones. Perfect for helping to reduce wind and breath noise from entering the microphone. Available in 5 colours to help make identifying your microphone quick and easy.
SKU: SHR-A58WS-RD -
Microphone Accessories
Rycote Single Square White Mic Flag
Square White Mic Flag
Product Code: 107307
A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307 -
Microphone Accessories
Rycote 40/55 Reporter Mic Foam (Single)
40/55 Reporter Mic Foam
Product Code: 104405
Suitable for reporter mics of 40 mm diameter, with slots no further than 55 mm from the front of the mic.
Main Benefits:
- Up to 10 dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield
- Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam
The Reporter Mic Foam is a discreet, slip-on foam windshield, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, these windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.
Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.
Additionally, you can now also benefit from a further 12 dB wind noise attenuation with Rycote’s Foam Windjammer, specifically designed to accommodate our range of Mic Foam windshields.
Compatibility – https://mymic.rycote.com/products/40_55-reporter-mic-foam/#compatibility
MyMic – https://mymic.rycote.com/products/40_55-reporter-mic-foam/
SKU: RYC-RY104405
