Rycote Invision Inv-6
Available on back-order
InVision INV-6
Product Code: 041106
The INV-6 is suitable for short small diaphragm condenser microphones of 19 -25mm diameter such as the Sennheiser MKH 8020/40/50 when used with their MZX XLR module. The mount features a pair of Single 72 (19/25) Lyres.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Suitable for the Audix M1280, M-Audio Pulsar II and Sennheiser e906, amongst others.
Fitted with:
2 x 19-25mm universal clips, with Standard (70mm wide) Lyre
Standard bar with 25mm (1″) centres
Maximum microphone length 120mm
An InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-6/#compatibility
$102.00
Available on back-order
Related products
-
Microphone Accessories
Rycote Triangular Black Mic Flag
Triangular Black Mic Flag
Product Code: 107302
A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/triangular-black-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/triangular-black-mic-flag/
SKU: RYC-RY107302 -
Microphone Accessories
Rycote Overcovers Adv, White (Pack)
Overcovers Advanced White (Pack)
Product Code: 066308
Contents: 25 x Stickies, 23mm Round. 5 x Fur Discs, 26mm Round
Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone.
Key features
- Large size (26mm) ideal for DPA Concealers
- Supplied with Stickies Adv Round, at 23mm also bigger than ‘Originals’
MyMic – https://rycote.com/microphone-windshield-shock-mount/lavalier-solutions/
SKU: RYC-RY066308 -
Microphone Accessories
Rycote Single Square White Mic Flag
Square White Mic Flag
Product Code: 107307
A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307
