Dynacore DT-4S Charger V-Lock Stand Up for 4 tiny batteries
- 16.8V/ 1.3A (1.3A per channel) charge current
- AC 90V~240V/47Hz~63Hz input
- DC 16.8V/1.3A charger output
$285.00
Charging of Li-ion battery is done through a V-Mount plate.
Universal AC input voltage for worldwide operation.
Charge current is 16.8V/ 1.3A (1.3A per channel), the charging time for DPM-98S is around 4.5 hours and also built-in an adapter out (16.2V/4A). The charger and adapter function can work at the same time.
It can charge twice the amount of batteries, so if you travel out with them, it will immediately reduce the required space by half.
The charger also can charge the normal size Dynacore batteries, DT-4S can charge two pcs normal size batteries, and the current is 3A.
Specifications:
|
Input |
AC 90V~240V/47Hz~63Hz |
|
Charger Output |
DC 16.8V/1.3A |
|
Adapter Output |
DC 16.2V/4.0A |
|
Dimension |
226x141x111.7mm |
|
Weight |
1.30Kg |
Related products
-
V-Lock and B-Mount batteries
Dynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
V-Lock and B-Mount batteriesDynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
● Internal Charger Battery V-Mount.
● Lightweight, compact, high-performance Lithium-ion battery pack.
● It can be charged by itself without using an external charger. The LED indicator will light on from 1 LED to 5 LEDs during charging, and all off when fully charged.
● The five-step LED power status indicator shows accurately remaining battery capacity.
● Industry-standard Power Tap& USB output(5V, 2A) can fit on-board Camera Light and other accessories. Before using the USB output, long-press the LED check button for 3 seconds to activate it.
● Input Voltage AC90V~240V 50~60Hz, apply to the global power grid.
● Built-in intelligent IC circuit control, protection for over-charge, over-discharge, over-current, outside circuit short and non-equilibrium an unconventional situation.
● Non-memory effect.
● Environment-friendly: No poisonous elements
● Dynacore Batteries are manufactured according to CE, ROHS standardSKU: DYN-DS-150SI -
V-Lock and B-Mount batteries
Dynacore D-2SN Charger V-Lock Stand-Up for 2 batteries
Dynacore D-2SN Stand up V-Lock Charger
Offering Simultaneous 2-channel charging for two 14.4 volt V-Lock batteries of any brand.
Charging is acheived through the V-Mount plate on each side of the unit.
Universal AC input voltage for worldwide operation. The Charger has extending feet to resist tipping over.SKU: DYN-D-2SN -
V-Lock and B-Mount batteries
Fxlion PL-Q280B 2 Channel Fast Charger V-Mount 16.8V 4A per channel
All our Chargers offer automatic Voltage detection ranging from 100 – 240VAC 47-63Hz. This opens the possibilities to travel with your charger anywhere in the world without even thinking about the different voltages.
Fast Chargers charge your batteries with a current of 4 to 4.5 Amps. Normal Chargers charge your battery with 2 Amps. This means that your charging time is cut in half.
SKU: FXL-PL-Q280B -
V-Lock and B-Mount batteries
Fxlion 2 Channel Automatic-Voltage Charger V-Mount 16.8V 4A x 2 29.4V 2A x 2
V-Lock and B-Mount batteriesFxlion 2 Channel Automatic-Voltage Charger V-Mount 16.8V 4A x 2 29.4V 2A x 2
14.8V and 26V simultaneous charging. This charger automatically identifies your battery voltage (14.8V / 26V) and adjusts for charging. You can charge 2 channels simultaneously. It is very compact, ideal for travel.
SKU: FXL-FX-4S7S2D -
V-Lock and B-Mount batteries
Dynacore D-TRAVEL-2 Charger V-Lock Travel (D-Tap)-type for 2 batteries
◆ Portable charger to charge batteries through the D-Tap connector.
◆ Dual D-Tap connectors are equipped, 2 batteries can be charged together.
◆ The total charger output is 16.8V, 4A.
◆ When 2pcs batteries are charged together, it will charge with the lowest voltage battery first with 4A current until the 2pcs batteries are with the same voltage level, and then it will charge 2pcs batteries simultaneously with 2A charging current each channel.
◆ LED charging indicator.SKU: DYN-D-TRAVEL-2
