Avenger C338 Clamp Quick Action baby clamp 20mm to 52mm Range 50Kg Payload
The Avenger C338 Quick Action Baby Clamp with 16 mm/5/8 inch spigot or pin is ideal for all types of lights or fixtures with a baby receiver. This slim, lightweight baby clamp designed with a unique fast quick action mechanism which locks down the clamp quickly, followed by minor adjustments using the T-Handle can easily hold lights up to 50 kg/110.2 lb. The jaws of this quick action baby clamp can grip pipe diameters ranging from 20 to 52 mm/0.78 to 2.04 inch. Along with the attached safety cable with carabiner for the clamp there is a dedicated slot to use an additional safety cable if needed. Recommended Accessories: C155, C155-01, C155-02, FF3276, E390, C1575B.
$157.00
Related products
-
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C464-1 Coupler LP Eye M12 Bolts Nuts Range 48-52mm 300kg Payload Alum Alloy
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C464-1 Coupler LP Eye M12 Bolts Nuts Range 48-52mm 300kg Payload Alum Alloy
The Avenger C464-1 LP Eye Coupler grid clamp comes supplied with an attached M12 Bolt and includes the nut which is ideal for customized applications. This popular clamp is ideal for many rigging systems, truss and entertainment configurations. The LP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 48 mm(1.9”) to 52 mm(2.04”) and is 50 mm(1.96”) wide. Capable of holding up to 220 kg/661.4 lb loads this clamp will perform in many demanding environments. TÜV and SÜD certified. Recommended Accessories: E390, C155, C460-1, C461-1, C463-1, C4460-1, C462-1, E200, C4465-1.
SKU: AVN-C464-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C337 Clamp Quick Action Jr TUV Cer 40mm to 70mm Range 100Kg Payload Gravity Cast Alu
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C337 Clamp Quick Action Jr TUV Cer 40mm to 70mm Range 100Kg Payload Gravity Cast Alu
The Avenger C337 Quick Action Junior Clamp with 28 mm/1 1/8 inch receiver is the perfect partner for hanging lights with a 28 mm/1 1/8 inch Junior spigot or pins. Designed with a unique fast quick action mechanism which locks down the clamp quickly, followed by minor adjustments using the rubber covered T-Handle this clamp easily can hold lights up to 100 kg/220 lb. Made in gravity cast aluminum, this clamp is ideal to hang all types of lights and luminaires in TV studios and theatres. Its incredible coupling range means it can clamp onto most industry standard pipe diameters (Pipes ranging from 40-70mm/1.57 to 2.75 inch). To meet all safety requirements, the Avenger C337 has been designed with a dedicated slot for flexible steel safety cables, has a built in safety pin to secure the load or adapters mounted into this clamp. T-Top rubber T-Handle cover included to improve grip. TÜV SÜD certified. Recommended Accessories: E200, C155, FF3276, D400, C626, A2014, A2029, A2029CB, C590, C4461-1.
SKU: AVN-C337 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
The Avenger C4462-1 MP Eye Coupler grid clamp comes supplied with a 16 mm(5/8”) baby male spigot. Commonly referred to as a Little Ben Clamp this popular clamp is ideal for many rigging systems, truss and entertainment configurations. This popular MP cheeseboro clamp has a wider clamp range than the LP clamp and is ideal for many rigging systems, truss and entertainment configurations. The lower jaw has a special flattened shape which helps in the sizing of this clamp and the increased flexibility to clamp down on different types of tubing. Capable of holding up to 300 kg loads this clamp will perform in many demanding environments. The MP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 42 mm(1.65”) to 52 mm(2.04”) and is 50 mm(1.96”) wide. TÜV and SÜD certified. Recommended Accessories: C155, C155-01, E390, C460-1, C463-1, C4460-1, C464-1, E200, C4465-1.
SKU: AVN-C4462-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload Alu
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload Alu
Avenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload
Works on diameters from 10mm to 55mm. It has a 5/8″ mounting stud and a load capacity of 220.46 lb (100 kg). Made of aluminum.
SKU: AVN-C210
