Avenger B7043CS-1 Stand Strato Safe 43 Chr TUV 155-427cm 70kg Payload Weighs 60kg Braked Wheels
The Avenger B7043CS-1 Flat Jumper Strato Safe Stand 43 is built in Chrome Steel and Gravity Cast aluminium, comprised of 4 sections and 3 risers, this stand surpasses industry requirements for safe operation and is part of the Strato Safe family. The B7043CS-1 raises each riser independently allowing for a minimum height of 155cm/61 inches and a maximum height of 427cm/168.1 inches and can handle loads up to 70kg/154lbs. Each section uses a uniquely designed gear box that uses a ratchet crank handle to safely raise each riser into place. The ratchet crank handle can conveniently be stored to the top casting of the stand and is always available when needed. Braked rubber wheels are sold with this stand and allow for easy moving in studio and other smooth and semi-smooth surfaces. This stand comes with a 087WBK wind brace kit for extra securing of the load when required. Other Wheel options are available if needed. (B9000P). Avenger works hard to develop and certify gear for different markets! The B7043CS-1 along with being TÜV rated is also CE certified and has a CE declaration. Don’t settle for copies that try to emulate this TÜV and CE certified stand. Recommended Accessories: F100, 087WBK, C590, G200-1, G300, E200, D650, C626, C461-1, C4461-1, E390.
$7,121.00
Related products
-
Stands Crank, Wind Up and Long John
Avenger B7057FF Stand Long John with Gas Lift 180-570cm 120kg payload Steel FOAM FILLED wheels w85kg
Stands Crank, Wind Up and Long JohnAvenger B7057FF Stand Long John with Gas Lift 180-570cm 120kg payload Steel FOAM FILLED wheels w85kg
The Avenger B7057FF Long John Silver Stand is the largest stand in the Avenger offering! A heavy-duty stand used primarily for cine applications capable of supporting maximum payloads up to 120 kg/264 lbs up to a height of 570 cm/224.4 in. The winch driven hoisting system allows for easy lifting and lowering of large panel lights and HMI’s. The stand includes foam filled braked wheels, 3 built-in levelling legs and swift-lift gas pistons providing the ultimate ease of set-up and take down. The stand is made of steel and aluminum and features 5 sections, 4 risers and can perform perfectly on set, in studio or in any location! Recommended Accessories: 425B, D650, E200, G300, 087WBK, C626, C461-1, C4461-1, 163-12, E390.
SKU: AVN-B7057FF -
-
Stands Crank, Wind Up and Long John
Avenger B6040X Stand Wind Up Super 40 Chrome 196/386cm 80kg Payload Weighs 39kg Foam Fill Wheels
Stands Crank, Wind Up and Long JohnAvenger B6040X Stand Wind Up Super 40 Chrome 196/386cm 80kg Payload Weighs 39kg Foam Fill Wheels
The Avenger B6040X Super Wind Up stand with wheels is built with a stainless-steel column, stainless-steel legs, chrome steel risers and geared column. The B6040X is constructed of 3 sections and 2 risers which extend simultaneously at 4.4 cm per handle turn. The top tube houses a junior socket which is 28 mm/1 1/8 in and also has a built in ring to add tie downs or wind brace kits. An internal safety cable system ensures simultaneous retrieval of all sections.
The B6040X also features a rapid and fine adjustment levelling leg and braked foam filled wheels (code 474) for easy rolling (with no memory) even on the most challenging terrain. It has a maximum payload of 80 kg/176.4 lbs and can raise up to 386 cm/152 in. It also features 1 step on the column to make easy adjustments when loaded.
Recommended accessories: E200, D650, 425B, G200-1, 087WBK, C590, C626, C624, C622, 163-10, 620-10”.
SKU: AVN-B6040X -
Stands Crank, Wind Up and Long John
Manfrotto 083NW Stand Wind Up Chrome Steel 139-247cm 45kg payload
Stands Crank, Wind Up and Long JohnManfrotto 083NW Stand Wind Up Chrome Steel 139-247cm 45kg payload
This expertly designed Wind Up Stand combines all the must-have features you’d expect from a heavy-duty stand. Blending strength, portability and stability, it’s an essential item for serious photographers.
This heavy-duty stand is made to last, even when used on rugged terrain, and with heavy loads. The chrome plated steel adds strength as well as looking sleek, and it comes in 2 sections, with 1 risers. This enables you to raise and lower the stand in moments, without any fiddling. In fact, you can extend up as high as 247 cms, giving you scope to capture almost any shot.
The top features handy, universal mounts for total compatibility too, helping you to easily mix and match with whatever gear you need. It has a 16mm female socket and a 16mm male stud included, and it can support an impressive payload of 45kg. The levelling leg keeps everything nice and steady, even on rougher ground, and you can pair with wheels if you need to glide across the floor effortlessly. Compatible wheels are 104 and 104G.
SKU: MAN-083NW -
Stands Crank, Wind Up and Long John
Avenger B7018 Stand Strato Safe 18 126/175cm 100kg Payload Weighs 27kg Braked Wheels
Stands Crank, Wind Up and Long JohnAvenger B7018 Stand Strato Safe 18 126/175cm 100kg Payload Weighs 27kg Braked Wheels
The B7018 Strato Safe Stand is the smallest stand in terms of height in the Avenger Strato Safe Family! The Aluminium legs and chrome steel column are capable of handling loads up to 100 kg/220 lbs at a max height of 175 cm/68.9 inches. Equipped with foam-filled braked multi-directional wheels the B7018 is capable of easily moving the biggest lights into position on different types of terrain. The heavy-duty gearbox uses a removable ratchet handle that easily raises and lowers the most demanding loads. When the ratchet handle is not in use you can store it on the side of the top casting which is situated and attached to the lower column. Recommended Accessories: 425B, D650, E200, G300, C626, 087WBK, C590, F100, C461-1, C4461-1.
SKU: AVN-B7018
