Avenger C463-1 Eye Coupler LP w Lifting Ring Range 48-52mm 220kg Payload
The Avenger C463-1 LP Eye Coupler grid clamp comes supplied with an attached lifting ring. This popular clamp is ideal for many rigging systems, truss and entertainment configurations. TÜV and SÜD certified, you can feel confident that this cheeseboro clamp with lifting ring will perform in any demanding environment. Capable of holding up to 220 kg/484 lb loads the LP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 48mm (1.9”) to 52mm (2.04”) and is 50mm (1.96”) wide. Recommended Accessories: E390, C155, C460-1, C461-1, C462-1, C4460-1, C464-1, E200, C4465-1.
$74.00
Related products
-
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload Alu
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload Alu
0 out of 5(0)Avenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload
Works on diameters from 10mm to 55mm. It has a 5/8″ mounting stud and a load capacity of 220.46 lb (100 kg). Made of aluminum.
SKU: AVN-C210 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
0 out of 5(0)The Avenger C4462-1 MP Eye Coupler grid clamp comes supplied with a 16 mm(5/8”) baby male spigot. Commonly referred to as a Little Ben Clamp this popular clamp is ideal for many rigging systems, truss and entertainment configurations. This popular MP cheeseboro clamp has a wider clamp range than the LP clamp and is ideal for many rigging systems, truss and entertainment configurations. The lower jaw has a special flattened shape which helps in the sizing of this clamp and the increased flexibility to clamp down on different types of tubing. Capable of holding up to 300 kg loads this clamp will perform in many demanding environments. The MP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 42 mm(1.65”) to 52 mm(2.04”) and is 50 mm(1.96”) wide. TÜV and SÜD certified. Recommended Accessories: C155, C155-01, E390, C460-1, C463-1, C4460-1, C464-1, E200, C4465-1.
SKU: AVN-C4462-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C465-1 Coupler LP Eye 28mm Bushing 220kg payload Aluminum
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C465-1 Coupler LP Eye 28mm Bushing 220kg payload Aluminum
0 out of 5(0)The Avenger C465-1 LP Eye Coupler grid clamp comes supplied with a 28 mm (1 1/8”) junior receiver. This popular clamp is ideal for many rigging systems, truss and entertainment configurations. The LP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 48 mm (1.9”) to 52 mm (2.04”) and is 50 mm (1.96”) wide. Capable of holding up to 300 kg/661.4 lb loads this clamp will perform in many demanding environments. TÜV and SÜD certified. Recommended Accessories: E390, C155, C460-1, C461-1, C463-1, C4460-1, C464-1, E200, C4465-1.
SKU: AVN-C465-1