Kondor Blue 38cm D-Tap to DC Right Angle Straight Cable (5.5 x 2.5mm) (Canon C70)

The D-Tap to LEMO 0B-Type 2-Pin Male Power Cable is a blue cable for connecting a professional V-mount or Gold mount battery to a camera, wireless device, light, or other gear that can be powered with a 2-pin LEMO-type cable. The power cable has a D-Tap on one end and a 2-pin LEMO 0B-type connector on the other.

Compatible with: Teradek Bolt, Z CAM EVF, ARRI, RED, Paralinx, Preston, Switronix, SmallHD, Transvideo etc.

Pin-1 GND – This means that the pin next to the red dot is the ground.

The D-Tap to Barrel Adapter cable allows you to draw power from a D-Tap connection like an Anton Bauer or V-Mount battery plate.

Warning: The customer is responsible for determining battery polarity. Improper polarity will damage the monitor and void the warranty. For use with SmallHD monitors, the centre pin of the “barrel” connector of the D-Tap cable should always be positive.

Power your Nanlite LED lights from a V-Lock Battery length 70-140cm
Using this Nanlite CB-DT/DC adaptor cable, the Forza 60, 60B and 660C runtime is up to 5 hours at full power from a 250Wh V-Lock battery!

The curly cord allows the V-Lock to sit on the ground while the Forza is mounted on a light stand.

One end of this adaptor cable is D-Tap, the other end fits the DC-In port of the Nanlite LED Light.

The Nanlite CB-DT/DC is compatible with: Forza 60/60B/60C, PavoTube 15C/30C, Pavotube 15X/30X, and other lights powered by DC port