TecArt Manual Switcher Rack Mount DMX 8 in 4 out
The TecArt Manual Switcher is used to switch between two lighting desks, with up to 4 DMX universes for each desk. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
The units are available with a choice of 3 or 5 pin connectors, and are also available in 1, 2 or 3 inputs/outputs.
Related products
-
Data and DMX distribution
TecArt Splitter Truss Mount RDM 4 way
The TecArt range of data splitters are available as truss mount units.
The units are available with a choice of 3 or 5 pin connectors and have 4 outputs. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
SKU: n/a -
Data and DMX distribution
TecArt Splitter DIN Rail DMX 4 way
The TecArt range of data splitters are available as DIN Rail mountable units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DR can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• Terminal Strip Output and Input Connector.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: DIN Rail.
• DMX signal input: Terminal block.
• DMX signal output: Terminal block.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a -
-
Data and DMX distribution
TecArt Main/Backup Switcher Rack Mount DMX 8 in 4 out
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX streams as soon as the main inputs are disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The unit is available with up to 4 main DMX streams and 4 backup DMX streams. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
SKU: n/a -
Data and DMX distribution
TecArt Main/Backup Switcher Desktop DMX 2 in 1 out
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX stream as soon as the main input is disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The units are available with a choice of 3 or 5 pin connectors.
SKU: n/a
