Nanlite PavoTube 30C LED Tube RGBWW 1.2m
Let your creativity run wild with these LED tubes. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.
At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you’re using, making it easy to fine-tune and then recreate them in future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.
$515.00
This light’s master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects. Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter and also has two built-in 2200mAh batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall.
The Pavotube has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the throw of the lighting. Both 2-foot and 4-foot variants are available as single lights as well as kits of two lights and four lights.
Studio Quality Lighting
An amazingly versatile studio lighting fixture that featuring 0-100% dimming, a max output of 2850 lumens, adjustable colour temperature from 6500-2700K as well as a full spectrum RGB and pre-programmed special lighting effects.
Full Creative Control
Easily achieve beautiful results without adding plastic filters or gels. The PavoTube Tubes’ easy-to-use dials and buttons enable you to dial temperature from warm to cold (6500K-2700K) or hue and saturation in RGB mode.
Power Anywhere
Perfect for use in the studio or on location, PavoTube RGB+W Tubes can run off either the included AC adapter or their internal Li-ion batteries for up to 2 hours at full brightness when no mains power is available.
Limitless Possibilities
Simply connect multiple PavoTube RGB+W Tubes together via the included sync cord to build and shape a powerful bank of lights with synchronized adjustments and effects.
Specifications:
Model: PavoTube 30C 1Kit
Dimensions:117cm x 48cm x 48cm
Weight: 1.2kg
Dimming: 0 to 100 % continuous
Color Temperature: 2700K-6500K
Power Consumption: 32W*5
Power Supply: DC15V/4A,100-240V AC
CRI/TLCI: 98/95
Control: Dimming with NNRC1 Remote, Wifi App control with with LGA30 Wifi Router, Synchro control with Pavotube Sync cables
Charge Time: Full: 4 Hours, 80%: 3 Hours
Runtime:
At 10% Brightness: 20 Hours
At 50% Brightness: 4.4 Hours
100% Brightness: 2.2 Hours
Special Effects: Storm, Flash, Candle, Color Cycle
Brightness:
2700K LED Bulb:1m-633Lux/59fc; 2m-194Lux/18fc; 3m-101Lux/9fc
6500K LED Bulb:1m-719Lux/67fc; 2m-209Lux/19fc;3m-111Lux/10fc
RED Flat LED:1m-251Lux/23fc; 2m-82Lux/8fc;3m-43Lux/4fc
GREEN Flat LED:1m-663Lux/62fc;2m-210Lux/20fc;3m-109Lux/20fc
BLUE Flat LED:1m-103Lux/10fc;2m-38Lux/6fc;3m-23Lux/2fc
Lumen Output:
At 2700K: 2700 Lumens
At 3200K: 2700 Lumens
At 5600K: 2850 Lumens
At 6500K: 2850 Lumens
Red: 853 Lumens
Green: 234 Lumens
Blue: 358 Lumens
What’s included:
1x Nanlite PavoTube 30C 4′ RGBW LED Tube
1x Nanlite AC Adapter
1x Nanlite Mounting Clip
1x Nanlite Padded Carrying Bag
Related products
-
LED tubes and tape
Godox TL30 4 Light RGB Tube Light Kit 30cm
The TL30 RGB LED Tube Light is a lightweight LED light with a compact tube-shaped form factor, featuring a bi-color Kelvin range from 2700-6300K, with an incredibly high TLCI rating of 99 and CRI rating of 97, so colors will render with extremely high accuracy in still and video applications alike. It also features full RGB gamut output for an array of up to 36,000 available colors, with green/magenta adjustability, and 13 tunable effects.
For all its versatility, the TL30 is simple to set up and use. It is easily controlled using intuitive, built-in analog controls and an LED display, and also pairs with the free-to-download control App via Bluetooth from up to approximately 98 feet away. An integrated lithium-ion battery will power the TL30 for 60 minutes at full power, and it recharges or operates via a USB-C port from any 5V/2A USB source. Built-in magnets allow it to attach to any metal surface, and each end of the tube has a 1/4″-20 threaded female socket.
SKU: GOD-11.TL30-K4 -
LED tubes and tape
Godox TL60 4 Light RGB LED Tube Light Kit 750mm
Godox Tube light TL60 is designed to give users the freedom to inspire their creativity for endless range of shooting scenarios, like film making, video and photography in anywhere you go. With multiple color modes, CRI 96 and TLCI 98, ultra-smart control system, and flexible tube design, TL 60 enables variety lighting setups to represent impressive performance on highly explore creativity, carry out high efficiency shooting and produce memorable magic moments.
This RGB Tube Light TL60 is a multifunctional RGB light with dual color temperature, high light brightness and wireless adjustment. Suitable for almost all shooting occasions e.g. live, camping, make up, portrait shooting, make up, video, wedding, children photography, etc. It’s portable and easy to be operated.
SKU: GOD-11.TL60KIT2 -
LED tubes and tape
Nanlite PavoTube 15C LED Tube RGBWW 0.6m
Let your creativity run wild with these LED tubes. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.
At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you’re using, making it easy to fine-tune and then recreate them in future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.
SKU: NAN-NNPAV15C1KIT -
LED tubes and tape
Astera AX1 PixelTube Set RGBW 8 x 1m
Astera AX1 PixelTube kit of 8 including Hard Case
This Set of eight Pixeltube tubes is the kit to own, with everything you need to carry, mount and create. ?It comes in a ?specially designed case that charges while it protects and stores your Titan tubes. ?The kit includes a great range of accessories including clamps and spigots to mount or grip your tubes for use. The AX1 pixel tubes are a powerful pixel controllable LED RGBW baton that can be mounted to throw light and light your subject or be used in shot for a huge range of app controlled lighting effects. The possibilities are enormous, just add your creativity.
SKU: AST-AX1-SET -
LED tubes and tape
Digital Sputnik Voyager Tube RGB 4ft
Voyager combines a light source, battery and remote controller into one system. Any number of Voyagers is easy to set up and control with the help of a phone, tablet or computer. Voyagers’ software platform is continually growing with a selection of shaders and features, such as automatic detection or video streaming. Voyagers come in two sizes: 2 FT, with 40 individually controlled RGBW pixels and 4 FT, with 80 of them.
With the Voyager, it is possible to use your favourite diffusion filter. There are two slots to install the filter. The first layer is inside the diffuser tube. The second layer is right over the LEDs, and the cutout strip mounts right into the groove around the LEDs.SKU: n/a
