Laserworld TARM3 FB4

3’000 mW guaranteed power
Graphics capable – 45kpps @ 8° ILDA Scanners
Full color mixing – analog modulation
Extremely sharp intense beams – low divergeance of 0.6 mrad
Link multiple units with linking power, interlock, DMX, ILDA
Control screen for convenient mode selection
Free computer control software – Showeditor – upgradable to Showcontroller
Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
Multiple control modes – stand-alone, DMX, ArtNET, LAN and ILDA
Rugged tour grade compact housing
incl. waterproof flightcase

$6,999.00

Description

The tarm 3 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 3’000 mW after optics.

The tarm 3 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX and automatic mode.
The tarm 3 comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The benefits include:

3’000 mW guaranteed output power
a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
high-precision diode arrays provide an excellent beam divergence of less than 0.6 mrad for a low beam diameter
pure diode laser
novel method for increasing the beam precision of the single-mode diodes
beautiful colors and good color fading
the tarm 3 impresses with very bright 637 nm single mode red

The tarm 3 laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than 0.6 mrad (full angle).
It is equipped with a bright red (1’000 mW / 637 nm), a green (900 mW / 520 nm), and a blue (1’700 mW / 450 nm) diode laser source.

The scanners are very fast with 45kpps @ 8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210 scanners with 60 kpps@8° ILDA and a max. scan angle of 60°.

This show laser light has a switchable scan safety.

The housing of the tarm 3 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 3 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.

SKU: LWD-TARM3-FB4 Category: Effects lighting Brand: Laserworld