Marantz PMD620 /Tascam DR-1 Mini Windjammer

Product Code: 055369

Suitable for Marantz PMD620 /Tascam DR-1

Main Benefits:

The Mini Windjammer for the Marantz PMD620 and Tascam DR-1 provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation,  easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.

Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.

Note: This Mini Windjammer is specifically designed for the Marantz PMD620 and Tascam DR-1.

InVision INV-4

Product Code: 041104

Suitable for compact mics such as the Schoeps CCM series and miniature shotgun mics such as the AKG C747. The 9.5mm Lyre clips feature a reducing sleeve which grips the connector and the cable, leaving the body of the microphone free to be completely covered by a foam.

Main Benefits:

Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.

The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.

Tech Specs

Suitable for mics including the AKG C747, Sennheiser ME36 and Audio-Technica AT853a, AT831b, and AT803b.

Fitted with:

2 x 9.5mm clips with Standard (70mm wide) Lyre, and a reducing sleeve
Standard bar with 25mm (1″) centres
Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if required

An InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.

InVision INV-2

Product Code: 041102

Suitable for the Røde NT6 and Sennheiser MKH8000 series (remote), amongst others.

Main Benefits:

A range of shock mounts and accessories intended for use in studio recording.

The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone.

Rycote’s InVision models 1 to 3, are designed for discreet, low-profile use of compact microphones in broadcast studio environments where windshielding is not required.

Tech Specs

Width: 11cm
Height: 6cm
Length: 18cm

– 1 x 20mm clip at the front and 1 x 9.5mm clip at the rear, with InVision (43mm wide) Lyre
– Standard bar with 25mm (1″) centres

Lyre Web: InVision
Front clip: 20 mm
Back clip: 9.5 mm
Sleeve: No
Bar size: Standard

* not suitable for Boom Pole use