TecArt

GET YOURS

View Products

Main photo – cinematographic and photographic

PRO SOLUTIONS

ABOUT US

TWO DECADES OF CINEMATOGRAPHIC, PHOTOGRAPHIC, ARCHITECTURAL AND STAGE SOLUTIONS

EXPERTS IN SERVICE AND REPAIRS

LEARN MORE

AUSTRALIA'S LEADING SERVICE CENTRE FOR ADVANCED REPAIRS

MONOLIGHTS
AND FRESNELS

VIEW THE RANGE

CONTINUOUS

Your Recently Viewed Products

Microphone Accessories

Rycote Audio Kit – Marantz Pmd620/Tascam Dr1

Microphone Accessories

Rycote Audio Kit – Marantz Pmd620/Tascam Dr1

0 out of 5

(0)

Marantz PMD620/Tascam DR1 Audio Kit

Product Code: 046012

Suitable for Marantz PMD620/Tascam DR1

Main Benefits:

Blog, interview or podcast in any weather

Available for over a dozen types of recorder, mono or stereo

A combined Windshield and Suspension solution, the kit contains everything needed to protect a handheld digital recorder from outdoor wind noise, and also to isolate it from unwanted vibrations, whether from handling or stand-borne noise. It is aimed at journalists, film-makers, or anyone using a handheld digital recorder to make professional-quality audio recordings outdoors. It can be used location soundtracks or outside broadcast, or for simple audio podcasts or outdoor radio reporting.

Featuring the new 1/4″ to 3/8″ Swivel Adaptor, the suspension fits any portable recorder with a 1/4″ female thread. The suspension can then be mounted on a 3/8″ male thread, mic stand or boom pole, or be attached to a camera hot shoe. The 180° swivel allows for easy orientation of the recorder so it can point in the exact direction of the speaker.

Compatibility – https://www.mymic.rycote.com/products/marantz-pmd620_tascam-dr1-audio-kit/#compatibility

MyMic – https://www.mymic.rycote.com/products/marantz-pmd620_tascam-dr1-audio-kit/

SKU: RYC-RY046012

Lavalier Microphones

Hollyland Lark M1 Solo Kit (1 TX + 1 RX)

Lavalier Microphones

Hollyland Lark M1 Solo Kit (1 TX + 1 RX)

0 out of 5

(0)

HearClear Noise Cancellation
Charge & Store Two-in-One
Easy to Use Plug and Play Design
Tiny & Light Design
Hi-Fi Sound Quality
Stable Connection
650ft (200m) Transmission (LOS)
Wide Compatibility

SKU: HLY-LarkM1Solo

Video tripod accessories

Benro Lens Bracket for Video Head suits 600-800mm Lenses fits S6 S7 S8 & BV Heads

Video tripod accessories

Benro Lens Bracket for Video Head suits 600-800mm Lenses fits S6 S7 S8 & BV Heads

0 out of 5

(0)

A lens bracket to support very long lenses. Compatible with a number of Benro heads.

SKU: BEN-LS400

Phone rigs

Peak Design Mobile Motorcycle Mount SAE Cable Kit Black. 2M length for SAE cable compatibility

Phone rigs

Peak Design Mobile Motorcycle Mount SAE Cable Kit Black. 2M length for SAE cable compatibility

0 out of 5

(0)

Peak Design SAE charging cable kit for Peak Design Motorcycle Mounts. Connects to charging module via slim, proprietary waterproof inline connector. Burly PE insulation resists kinking, abrasion, and the elements. 2M length for SAE cable compatibility. Most newer bikes have natively integrated USB-C, USB-A, and/or SAE power supplies. For older bikes, we recommend the SAE Cable Kit with a 3rd party SAE battery harness. SAE Cable Kit users must unplug charging module when bike is not running to avoid battery drain. Other ways of preventing battery drain are installing a switched SAE battery harness or auto-shutoff relay for your SAE power source. Consult an experienced mechanic when working on your bike’s electrical system.

SKU: PEA-PD-M-MM-AN-BK-1

Photo tripod legs and systems

Benro Travel Slim Kit Aluminium Monopod Twist Lock N00 Head 4kg PL

Photo tripod legs and systems

Benro Travel Slim Kit Aluminium Monopod Twist Lock N00 Head 4kg PL

0 out of 5

(0)

Following the success of the original SLIM tripod, the travel kits offer a super compact folded length and slim profile.

With a max height of 145cm the Benro SLIM travel kits are a practical solution for photographers that need to travel light and compact, but still require a full spec tripod.

The aluminium FSL09AN00 Slim Travel comes with 5 section twist locking legs with 3 positions, and can be reverse folded for compact storage. A compact N00 ball head is included, with a quick release plate & bubble level built into the clamp, making it easier to get stable on all kinds of uneven terrain. Includes a Benro branded carrying case.

SKU: BEN-FSL09AN00

Block batteries and power banks

Jupio Sony BP-U65 14.4V 5600mAh (D-Tap/USB Output)

Block batteries and power banks

Jupio Sony BP-U65 14.4V 5600mAh (D-Tap/USB Output)

0 out of 5

(0)

Suitable for PXWFS5, PXWFS7
5600mAh capacity
Dtap + USB

SKU: JUP-VSO0034V2

Shoulder, sling and carry bags

Tenba Solstice v2 16L Sling Bag – Grey

Shoulder, sling and carry bags

Tenba Solstice v2 16L Sling Bag – Grey

0 out of 5

(0)

Camera/Tablet Capacity: Mirrorless or DSLR camera with 4-6 lenses, including a camera/lens combo up to 17 inches (43 cm) in length, plus a tablet up to 8 inches (iPad Mini). Compatible with lenses such as Sony 200-600mm, Canon 200-400mm/200-800mm, Nikon 180-600mm, Tamron/Sigma 150-600mm, as well as DJI Mavic drones.

All-Day Comfort and Quick Camera Access: Solstice Sling Bags provide the comfort and suppport of a backpack with the quick camera access of a shoulder bag. Capture Clip compatible mounting point on the strap.

Hidden Bluetooth Tracker Pocket Compatible with AirTag and Tile: Special neoprene sleeve securely fits an AirTag or Tile Bluetooth Tracker so you can always find your camera bag.

Tripod/Bottle Storage: Side pocket fits a tripod or a large water bottle.

Repositionable Lash Straps: Secure a jacket or other clothing layers to the outside of the sling.

SKU: TEN-636433

On light modifiers

Arri DoPchoice SNAPBAG® for X21

On light modifiers

Arri DoPchoice SNAPBAG® for X21

0 out of 5

(0)

Attaches Directly to the SkyPanel X21

Use With or Without X21 Dome

No Mounting Hardware Needed

Includes Two Diffusers and Carry Bag

SKU: ARR-L2.0049580

Microphone Accessories

Rycote 10cm Sgm Foam & Windjammer (24/25)

Microphone Accessories

Rycote 10cm Sgm Foam & Windjammer (24/25)

0 out of 5

(0)

10cm SGM Foam & Windjammer (24/25)

Product Code: 055204

Suitable for shotgun microphones, with slots no further than 10 cm from the front of the mic.

Main Benefits:

Using both foam and windjammer together provides up to 20dB wind and pop

Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam

The Windjammer offers a further 12 dB wind noise attenuation

The Shotgun Mic Foam is a discreet, slip-on foam windshield, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, these windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.
Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.

The Shotgun Mic Foam Windshields are supplied with a corresponding Rycote Windjammer for a further 12 dB wind noise attenuation.

Compatibility – https://mymic.rycote.com/products/10cm-sgm-foam-windjammer-24_25/#compatibility

MyMic – https://mymic.rycote.com/products/10cm-sgm-foam-windjammer-24_25/

SKU: RYC-RY055204

Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper

Avenger C465-1 Coupler LP Eye 28mm Bushing 220kg payload Aluminum

Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper

Avenger C465-1 Coupler LP Eye 28mm Bushing 220kg payload Aluminum

0 out of 5

(0)

The Avenger C465-1 LP Eye Coupler grid clamp comes supplied with a 28 mm (1 1/8”) junior receiver. This popular clamp is ideal for many rigging systems, truss and entertainment configurations. The LP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 48 mm (1.9”) to 52 mm (2.04”) and is 50 mm (1.96”) wide. Capable of holding up to 300 kg/661.4 lb loads this clamp will perform in many demanding environments. TÜV and SÜD certified. Recommended Accessories: E390, C155, C460-1, C461-1, C463-1, C4460-1, C464-1, E200, C4465-1.

SKU: AVN-C465-1

Cart accessories

Inovativ 1.75in Accessory Cross Bar Clamp

Cart accessories

Inovativ 1.75in Accessory Cross Bar Clamp

0 out of 5

(0)

Accessory Cross Bar Clamp (1.75 in.) allows for easy attachment of a 1.75 in. clamp to any crossbar, providing support for 1.75 in. mast-based INOVATIV accessories like the Camera Mount System, Tripod System, Steadicam System, and Mast Riser System.

SKU: INV-500-725