InVision USM Studio Kit

Product Code: 045002

Universal microphone shock-mount and pop filter for mics between 18 and 55 mm in diameter, and from 500 to 750 grammes in weight

Main Benefits:

The InVision Studio Kit is a complete suspension and pop filter system, which combines the Universal Studio Mount (USM) with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any microphone. The Pop Filter is designed to lock tightly on the USM’s outer support ring, where it can be left while mics are quickly and easily swapped in the USM.

Rycote’s Studio Kit is fast and easy to use, and has also proved harder-wearing, more vibration-resistant and better at protecting your mic from vocal pops and thumps without high-frequency loss, than any traditional elasticated microphone suspensions. If you record vocals, you owe it to yourself to try one. Go for the Universal solution, and let the Studio Kit rock your vox!

Tech Specs

Suitable for Large Diaphragm recording microphones

Mic diameters: 18-55 mm
Microphone length: up to 300 mm
Maximum Weight (vertical): 750 g (26.5 oz)
Maximum weight (horizontal): 500g (17.6 oz)
Suspension Rotation (maximum): 175%

Product Length: 300mm
Product Width: 130mm
Net Weight: 200.2 grams

InVision INV-1

Product Code: 041101

Suitable for the AKG C747, Audio-Technica ATM350, Sennheiser ME36, Schoeps CCM, amongst others.

Main Benefits:

A range of shock mounts and accessories intended for use in studio recording.

The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone.

Rycote’s InVision models 1 to 3, are designed for discreet, low-profile use of compact microphones in broadcast studio environments where windshielding is not required.

Tech Specs

Width: 11cm
Height: 6cm
Length: 18cm

Fitted with:

– 2 x 9.5mm clips with InVision (43mm wide) Lyre, and a reducing sleeve
– Standard bar with 25mm (1″) centres
– Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if required

Lyre Web: InVision
Front clip: 9.5 mm
Back clip: 9.5 mm
Sleeve: Yes
Bar size: Standard

* not suitable for Boom Pole used

InVision USM

Product Code: 044901

Universal microphone shock-mount suitable for microphones weighing up to 750 grammes & between 18mm and 55mm in diameter.

Main Benefits:

For several years, Rycote InVision mounts have been available for narrow-barrelled shotgun and stick microphones in broadcast and videography applications, but not until 2010, and the release of the striking Universal Studio Mount (USM) was there an InVision™ shock-mount capable of accommodating large-diaphragm recording microphones for use in recording studios.

Like the other InVision mounts, the USM makes use of Rycote’s patented vibration-resistant Lyre mount, but on this mount the W-shaped Lyres are placed around a central mounting ring with adjustable fasteners, allowing the USM to accommodate any microphone with a diameter of between 18 and 55 millimetres.

The Rycote USM updates the concept of the microphone suspension for the 21st century, completely omitting any elasticated parts and using modern materials to create a virtually indestructible shock-mount with a performance that far outstrips that of the humble ‘cat’s cradle’ suspension. In controlled tests at the Rycote factory, the USM provided up to twice the isolation of traditional microphone suspension systems.

Tech Specs

Suspension weight: 154g (5.4 oz)
Overall diameter: 120mm (4.72″)
Mic diameters: 18-55 mm
Microphone length: up to 300 mm
Maximum Weight (vertical): 750 g (26.5 oz)
Maximum weight (horizontal): 500g (17.6 oz)
Suspension Rotation (maximum): 175%

Product Height: 70mm
Product Length: 170mm (6.69″)
Product Width: 120mm
Net Weight: 155.6 grams

Compatibility – https://mymic.rycote.com/products/invision-usm/#compatibility